Water damage in Schurz properties rarely stays where it originated. It migrates through wall framing, saturates subfloor assemblies, moves along structural members, and collects in ceiling cavities — creating hidden moisture pockets that show no visible surface signs but create ideal conditions for mold growth within 48-72 hours. COS Water Damage Restoration's Schurz inspection team uses FLIR thermal imaging, calibrated pin-type and non-penetrating moisture meters, and systematic structural assessment protocols to map water migration through your property completely — before remediation begins or before you close on a purchase.
Here's what makes our Schurz inspection service more than a visual walk-through.
FLIR infrared thermal cameras detect temperature differentials in structural surfaces — a wet wall cavity cools differently than a dry one during evaporation, making moisture migration visible as a thermal signature even behind intact drywall. Our Schurz inspection team uses thermal imaging as the primary tool for tracing water migration paths through wall systems, subfloor assemblies, and ceiling cavities, identifying affected areas before a single pin is driven into a wall.
Thermal imaging shows probable moisture — calibrated moisture meters confirm it. Our Schurz inspectors use both pin-type meters (direct reading in framing and structural members) and non-penetrating radio-frequency meters (surface reading through drywall and flooring) to take quantified moisture content readings at all thermal-identified locations. These readings are recorded at labeled sensor points and become the data basis for the written inspection report.
Every COS Water Damage Restoration Schurz water damage inspection produces a written report: affected area descriptions, thermal images with annotations, moisture meter readings at labeled sensor points, water category determination (Cat 1/2/3), and a recommended scope of work with priority sequencing. Reports are formatted to be useful to your insurance carrier, a remediation contractor, or a real estate transaction where water damage disclosure is at issue.
Our Schurz inspection service covers two distinct use cases that require slightly different approaches: pre-remediation inspection (mapping an active or recent water event for claim documentation and remediation scoping) and pre-purchase or post-remediation verification inspection (confirming whether previous water damage was properly remediated or whether current conditions indicate an ongoing or previous water problem). Both use the same instrument suite and produce the same written report format, but the findings are interpreted differently for each use case.
COS Water Damage Restoration's Schurz inspection team covers every structural assembly type, every common water migration path, and every inspection use case encountered in residential and commercial water damage situations in NV.
When a water damage event has just occurred in a Schurz property — or happened within the last several days — our inspection maps the full extent of saturation while the moisture is still detectable by thermal imaging and direct meter readings. This inspection is the foundation of the remediation scope and the insurance claim documentation. Without it, remediation crews are guessing at what to dry, and insurance carriers are estimating on incomplete data. Our Schurz active event inspection captures the full saturation picture at the moment of peak detectable moisture — when the readings tell the most accurate story of what happened.
Real estate transactions in Schurz frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Schurz buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
Post-remediation verification is an independent assessment — not a rubber stamp.
Mold risk assessment in Schurz is distinct from air quality testing. We assess structural conditions and visible evidence — not air samples.
Below-grade moisture in Schurz properties is underdetected and underlies a significant portion of structural issues discovered later.
Our Schurz inspection reports are formatted to the documentation standards that insurance carriers use to evaluate water damage claims in NV.


Call +1-844-499-0972 and describe your situation — active event, pre-purchase, post-remediation, mold concern, or insurance documentation. Our Schurz scheduler assigns the appropriate inspection type and confirms your appointment. Most Schurz residential inspections are available within 24-48 hours.
Our Schurz inspector arrives with FLIR thermal camera, calibrated pin-type and non-penetrating moisture meters, and inspection documentation tools. The inspection begins with a thermal pass of all suspected affected areas, followed by direct meter readings at all thermally identified locations. Each reading is recorded at a labeled sensor point location on the floor plan.
You understand what was found before you receive the written report.
The written inspection report — thermal images with annotations, sensor point readings mapped to a floor plan, water category determination, and recommended scope — is delivered within 24-48 hours of the on-site session, formatted for insurance, remediation, or real estate use as appropriate to your situation. We're available to answer adjuster or real estate agent questions about the findings.



"We were purchasing a Schurz home where the seller had disclosed a prior basement water event and claimed it was fully remediated. COS Water Damage Restoration's pre-purchase inspection found moisture readings in the wall framing adjacent to the original event area that were significantly above dry standard — indicating incomplete drying. The written report we received gave us specific sensor point readings that we used to negotiate remediation credit from the seller before closing. Without that inspection, we would have closed into a mold problem."
"I had noticed a musty smell in a room of my Schurz home for months before calling COS Water Damage Restoration. Their inspection found active moisture in the subfloor assembly under an area rug — a slow pipe drip that had been going on long enough to saturate the subfloor significantly without any visible surface evidence. The written report documented the moisture readings, the thermal images showing the extent of the affected area, and the recommended scope. I would never have found this without the thermal camera."
"We manage a portfolio of Schurz rental properties and COS Water Damage Restoration's inspection service is what we use every time a water event is reported, prior to any remediation starting. The inspection report maps the damage completely — it's what we give our remediation contractor as the scope of work and what we give our insurer as the damage documentation. Having a consistent, instrument-backed inspection process has eliminated the disputes we used to have about whether remediation was complete or whether the damage scope matched what we claimed."
COS Water Damage Restoration's certified inspection team serves Schurz and surrounding communities throughout NV. Call +1-844-499-0972 to schedule your Schurz inspection.
Visible water damage is easy to find. The moisture behind your walls and under your floors is what causes the mold problem three months later. Call +1-844-499-0972 and our Schurz inspection team brings the instruments to find all of it.
📞 Call +1-844-499-0972 — Schedule Schurz InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Schurz, NV